Kitchen Upgrade

Working to a set budget? See affordable kitchen upgrades for what you can change for under €1000, €2000 and €3000.

How the upgrade is completed

Before arrival, clear the worktops and remove the contents of units included in the work. Put customer supplied handles in the room and keep the access route clear. Appliances, floors, walls and every surface that is staying are protected. The team then removes the necessary handles and prepares each included area in the order set out for the job.

Cabinet surfaces are degreased, keyed and repaired where small chips or dents can be filled. The appropriate primer is applied, followed by even spray coats in the chosen colour and sheen. If a suitable worktop is part of the plan, it has its own cleaning, preparation, bonding and coating stages. Handles and finishing details are completed after the sprayed surfaces are ready, so new work is not damaged by later preparation.

A kitchen upgrade is usually completed in 1 to 3 days, depending on the size of the kitchen and the work selected. A cabinet respray forms the main part of that timing. Worktop area, detailed profiles, the condition of the old surfaces and curing between coats can all affect the schedule. Your written quote confirms the scope and timing before work starts rather than relying on a general estimate.

Practical disruption is kept within the work area. There is no rip out when the existing units and layout are staying. At the end, doors and drawers are put back, customer supplied handles are fitted where agreed, masking is removed and the room is cleaned down. You can then see the cabinet colour, worktop finish and smaller details together rather than judging each change separately.

Planning the finishes together is useful even when not every surface needs work. The new cabinet shade should sit comfortably beside any worktop, splashback, floor and appliance that will remain. Where the worktop already suits the scheme, it can simply be protected. Where it makes the new cabinet colour feel disconnected, a suitable resurfacing option can be assessed as part of the same visit. The work is selected for the room rather than added without a reason.

Care after a coordinated upgrade

Use a soft damp cloth and mild detergent on resprayed cabinet surfaces. Avoid abrasive pads and harsh cleaners. The coating continues to harden after the visit, so treat doors and drawer fronts gently during the early curing period. For coated worktops, wipe spills promptly and always place hot pans on a stand rather than directly on the surface.

The difference between this service and a plain cabinet respray is scope. A cabinet respray focuses on doors, drawer fronts, frames and panels while protecting the existing worktops. An upgrade considers several visible elements together. A wardrobe respray is planned for bedroom storage and can be added to a wider booking, but it does not replace the kitchen assessment or the order needed for kitchen work.

Keep the care instructions for each included finish together after the job. Cabinet faces need gentle wiping rather than scouring, while a coated worktop also needs protection from direct heat. Handles should be used normally so hands do not pull repeatedly on painted edges. A coordinated upgrade may change several surfaces, but each one remains easy to manage when it is cleaned for its actual use.

Is this the right service for you?

Choose a kitchen upgrade when the layout still works but more than one visible part of the room feels dated. It suits a kitchen where cabinet colour, suitable worktops, handles and finishing details need to work as one scheme. It is also useful when you want one written scope for the full visible change rather than arranging separate visits without a coordinated order.

If the worktops and fittings already suit the room and only the cabinet colour needs attention, a kitchen cabinet respray is the more focused choice. If the furniture you want to refresh is fitted bedroom storage, see the wardrobe respray service. Where the units themselves or the layout no longer work, a surface upgrade may not be the appropriate solution.